Description
NEW Replacement Fuel Hose Line, Fuel Filter, and Fuel Tank Grommet Bushing for Husqvarna 50 Chainsaws. This setup replaces the Obsolete one-piece fuel hose/grommet. This kit consists of (1)- 581756202 Fuel Hose Spiral, (1)- 503443201 Fuel Filter, and (1)-503735801 Tank Grommet/Bushing. Just remove old fuel hose and filter, insert the Grommet/Bushing in the fuel line hole in the tank(install from the top), thread one end of spiral fuel hose through the hole in the grommet (a long-nose bent(45 degree or 90 degree angle) pair of needle-nose pliers are very helpful) and pull the hose through from inside the tank. Then clip off the points on the end of the fuel hose so the ends are square, then attach the fuel filter on the tank end and the other end to the fuel nipple on the carburetor. Please Look at the Pictures. What you see in the pictures are the exact item you will be receiving.
